Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Evanston, IL

Deck Cleaning for Cedar in Evanston, IL

Low-pressure wash for cedar. Deck washing that removes gray weathering, mildew and slippery growth from wood and composite decks without furring the boards. Typical cost $250-$600.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Deck Cleaning for Cedar in Evanston, IL brings it back, usually in a single visit. On cedar, the method we use is low-pressure wash.

Method and pressure

Low-pressure washCleaning method
Usually 500-800 PSI; cedar is soft and marks easilyPressure

Cleaning solution: A wood cleaner and brightener suited to cedar.

Caring for cedar

Cedar decks and fences turn silver-gray as the surface weathers. Gentle cleaning with a wood cleaner and brightener brings back the color, and a penetrating stain keeps it longer.

Avoid: High pressure, which gouges the soft wood and raises the grain.

How often: Clean yearly; refinish every 2-3 years.

Signs you need deck cleaning for cedar

  • Gray, weathered boards
  • Green or black growth and slippery spots
  • Stain that is peeling or worn through
  • Dark spots under planters and furniture
  • Mildew between composite boards

Why it gets dirty

  • Sun breaking down the wood surface (it turns gray)
  • Shade, leaves and moisture feeding mildew
  • Old stain or sealer wearing unevenly
  • Pollen and dirt trapped in the gaps

What you can do yourself

  • Clear the gaps between boards with a putty knife so water drains
  • Sweep often and keep leaves off the deck
  • Move planters and rugs now and then
  • Check for loose boards, nails and soft spots before anyone washes it

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Furry, gouged wood and lap marks from too much pressure
  • Water and grime blasted onto the house siding
  • Using chlorine bleach on wood, which can damage fibers and fasteners
  • Washing composite decking in a way that voids its warranty

Our process for deck cleaning for cedar

  1. Inspect the boards, rails and finish
  2. Protect nearby siding and plants
  3. Apply a wood or composite cleaner and let it dwell
  4. Rinse at low pressure, following the grain
  5. Apply brightener on wood and let it dry before any stain

Typical deck cleaning for cedar prices

$250-$600Typical range for a typical 200-400 sq ft deck
2-4 hoursTypical time on site
Once a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for cedar

Deck Cleaning for Cedar in Evanston, IL

Wood decks and fences in Illinois gray in the summer sun and grow mildew in shade. Clean and refinish them every two to three years, on a dry, mild stretch of days.

We provide deck cleaning for cedar across Evanston (ZIP codes 60201, 60202, 60203, 60204, 60208 and more) and nearby towns including Skokie (2.3 mi), Wilmette (2.7 mi), Lincolnwood (3.3 mi) and Kenilworth (3.4 mi). Call (555) 010-0000 for a free quote in Evanston.

Deck Cleaning for Cedar: frequently asked questions

How much does deck cleaning for cedar cost in Evanston, IL?

Deck Cleaning for Cedar typically costs $250-$600 for a typical 200-400 sq ft deck, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for deck cleaning for cedar?

For cedar: usually 500-800 PSI; cedar is soft and marks easily. What we avoid: high pressure, which gouges the soft wood and raises the grain. The cleaning solution does most of the work, followed by a gentle rinse.

Is deck cleaning for cedar safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule deck cleaning for cedar?

Clean yearly; refinish every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Evanston, IL

Gum Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$1,000

Roof Cleaning for Asphalt Shingle Roofs

Soft wash (no pressure). The black streaks on many asphalt roofs are a type of algae, often Gloeocapsa magma, that feeds on the limestone filler in shingles.

Typical $400-$1,000

Pre-Paint Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$600

Pressure Washing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$600

Parking Lot & Garage Cleaning for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $500-$3,000

Rust Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$500

Soft Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $300-$800

Gutter Cleaning

Clearing leaves and debris from gutters and flushing downspouts so water drains away from the house.

Typical $150-$350

Deck Restoration & Staining for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $800-$2,500

Efflorescence Removal

Removing white, chalky salt deposits from brick, pavers, concrete and stone.

Typical $200-$600

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Oil Stain Removal

Lifting oil, grease and fluid stains from driveways, garage floors and parking areas.

Typical $100-$300

Ready for a cleaner home or business?

Get a free pressure washing quote in Evanston, IL. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote